- What you're seeing
- Why it happens
- What correct work looks like
DrywallOttawa reference
The Wall of Regret
Every one of these is a fixable problem — the point isn't to shame anyone, it's to help you spot it before you sign off on the work. Filter by what you're seeing.
No names, no addresses, no faces. This page shows the defect, not the contractor.
Defect examples
No entries in this category yet.
How to read the wall
Every photo here is a real drywall defect we have been called to fix in Ottawa, filed by what you can see from the room. Each entry says what you see, why it happens and what the proper repair is. Photos on this page contain no names, addresses, faces, licence plates or client-identifying details unless HomeUpgraders separately obtained authorization to publish them.
The categories
- Fastener pops: Nail or screw heads pushing back through the finished surface.
- Visible seams: Butt joints or ridges you can see or feel under paint or light.
- Tape failure: Bubbling, cracking, or lifting joint tape.
- Texture mismatch: A repair or addition that doesn't match the surrounding texture.
- Sagging / deflection: Ceiling or wall drywall sagging between framing, usually from spacing or moisture.
- Moisture staining: Discoloration or bubbling from water exposure or an active leak.
- Poor corner bead: Crooked, loose, or poorly finished corner beads.
- Inconsistent sanding: Sand marks, ridges, or flashing visible once painted.