DrywallOttawa planning tool

See how your drywall fits.

Every sheet placed, every cut reused, the order built from it. Spin the sample room, tap a sheet — then do it with yours.

How to use the sheet plan (video) →

Sample room sample
All sheets in place
HOMEUPGRADERS
—sheets
—waste
—offcuts reused
—to buy
Tap a sheet to see what it is and where it came from. Tap empty wall while the room is half boarded to hang the next sheet.

See it on a photo of the wall

The plan's sheets, joints and cut-outs drawn on a real wall, in perspective. Drag the four dots onto the wall's corners, or let Meta's SAM 3.1 find the wall, its windows and its doors.

Your photo stays in this browser. Find the wall sends it once to Meta's SAM 3.1, through Home Upgraders, to outline the wall (signed in, one AI turn); Home Upgraders doesn't keep it. The photo never measures the wall: its length and height come from the plan.

Try changing the room

The sample room re-plans as you move anything. Sizes here are samples until you tap My room sizes.

Measured ceiling height
Doors
Windows

Getting the boards in

A board has to reach the room before it goes on the wall. Pick the way in — stairs with a turn or a small window keep the long boards out, and the plan only buys what fits.

Your order, as it stands

From the placed sheets, not from square feet. Allowances are marked.

Can you beat the optimizer?

One wall from this room, your pile of boards. Tap a board to hang it — the courses fill left to right, top first, and whatever you cut off goes on your offcut pile. Then see what the optimizer does with the same wall.

Professional mode — joists, walls and openings, wet zones, your rules, the drawings, the offcut pile, the full order sheet, saving

How the room is built

Ceiling sheets run across whatever carries them. Tell the plan which way the joists run; if there is strapping, the sheets run across the strapping instead.

Walls, doors, windows and wet zones

Positions from a scan or the Rooms page are kept; positions the room does not have are centred and marked assumed — slide them where they really are. Butt joints have to land on a stud: say which end of the wall the studs are counted from (a 14 ft wall cannot have one 4 ft from both ends). A wet zone (tub or shower) on a wall is cement board from its sill to its top; the rest of that wall stays drywall.

Your rules (the defaults are Ryan's working method)

The plan on paper

Order sheet

Quantities come from the placed sheets, not from square feet. Allowances are marked and are yours to change. Prices are yours too — type them in if you have them; nothing is ordered from here.


Optional HomeUpgraders save

Signed in, you can keep this plan in one of your Home Upgraders projects and open it again on any device.

Sign in

Checking HomeUpgraders account connection…

DrywallOttawa